manualshive.com logo in svg

Buffalo TeraStation 6000 Series, Руководство пользователя

Поделиться
Скачать
Buffalo TeraStation 6000 Series Скачать руководство пользователя страница 103

Code

Description

Corrective Action

Log Example

Code 23

Invalid characters were used in 
the filename or folder name of 
the backup destinations.

Change the filename or folder 
name using compatible characters. 
Available characters are described in 
the 

“Adding a Shared Folder”

 section 

in chapter 3.

rsync error: some 
files could not be 
transferred (code 23) at 
main.c(702)

The backup destination files 
were updated while the 
backup job was running.

Do not overwrite the backup 
destination files while the backup job 
is running. If updated, the backup 
destination files will not be backed up 
and the backup job will fail.

The TeraStation backed 
up the data to the FAT32-
formatted USB drive, then the 
capitalization of letters in the 
filenames or folder names on 
the backup source TeraStation 
was changed.

Do not change the capitalization 
of letters in the filenames and 
folder names on the backup source 
TeraStation if the backup destination 
USB drive is formatted to FAT32. Linux 
on the TeraStation is case-sensitive 
but FAT isn’t, so the same filename 
and folder name that only differs in 
the capitalization of letters will not be 
identified and treated as the same file 
or folder. To back up properly, using 
Btrfs, XFS, or ext3 is recommended.

Code 24

The backup destination files 
were updated while the 
backup job was running.

Do not overwrite the backup 
destination files while the backup job 
is running. If updated, the backup 
destination files will not be backed up 
and the backup job will fail.

rsync warning: 
some files vanished 
before they could be 
transferred (code 24) at 
main.c

Code 30

The Ethernet cable was 
disconnected from the 
backup source or destination 
TeraStations while the backup 
job was running.

Reconnect the Ethernet cable.

rsync error: timeout 
in data send/receive 
(code 30) at io.c(195) 
[sender=3.1.0]

B14

Insufficient TeraStation 
memory.

Restart the TeraStation and try again.

-

B101

The backup destination 
TeraStation does not exist.

Check that the backup destination 
TeraStation is turned on, the Ethernet 
cables are securely connected, 
and the hostname of the backup 
destination TeraStation is not 
changed.

-

B102

Check that the backup destination 
folders on the backup destination 
TeraStation exist in the shared folder 
list and the backup destination 
folders are configured for backup in 
Settings.

-

B103

The backup source folders on 
the backup source TeraStation 
do not exist.

Check that the backup source folders 
on the backup source TeraStation 
exist in the shared folder list.

-

102

Chapter 5 Backup

Содержание TeraStation 6000 Series



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды