Buffalo LinkStation LS-CHL Скачать руководство пользователя страница 194

Страница: 194 / 214

LinkStation User Manual

193

Appendix

Error code Descriptions

E04

The firmware is corrupted. Contact Buffalo technical support for assistance.

E10

The LinkStation is running on the UPS battery due to a power outage. The system

will now be shut down safely. Check that power is being supplied to the UPS, and if

there are no problems, turn on the LinkStation.

E11

An error occurred in the fan speed. Check that no foreign objects or dust are

clogging the fan. If any foreign objects or dust are found, use a pair of tweezers, air

duster, or other tool to remove them.

If the error is displayed again, contact Buffalo technical support for assistance.

E12

System temperature has exceeded the maximum safe value. Do not place objects in

the area around the LinkStation. Also, move the LinkStation to a cooler location.

E15

The bad sectors in the hard drive have reached a dangerous level. Contact Buffalo

technical support for assistance.

E16

Unable to find the hard drive. The drive may be disconnected or may have failed.

Contact Buffalo technical support for assistance.

E22

Mounting of hard drive failed. Format the hard drive. After formatting and rebooting,

if the error still appears, contact Buffalo technical support for assistance.

E30

The hard drive may be damaged. Contact Buffalo technical support for assistance.

Содержание LinkStation LS-CHL























































































































































































































Результаты поиска

Содержание LinkStation LS-CHL

Отзывы:

Похожие инструкции для LinkStation LS-CHL

Бренды по названию

Популярные бренды

Buffalo LinkStation LS-CHL, Руководство пользователя

Результаты поиска

Содержание LinkStation LS-CHL

Отзывы:

Похожие инструкции для LinkStation LS-CHL

Бренды по названию

Популярные бренды