Chapter 4 Web Admin interface
LinkStation User Manual
176
Name
Descriptions
Restore/Erase
Restore
Factory
Defaults
Upon restore Click [Modify Settings] and select whether or not Initialization will reset the
admin password.
Note:
If [Keep current admin password] has been selected, you cannot reconfigure
the LinkStation without the password. Please write down the password and
keep it in a safe place!.
Restore
LinkStation
The following settings are initialized by [Restore LinkStation].
LinkStation Name, Description, NTP Settings, Workgroup Settings, Shared
Service Settings, Access Restrictions for Shared Folders, User Settings, User
Group Settings, E-mail Notification, UPS Settings, Backup Jobs Setup, Admin
username and password, Print server settings, WebAccess, Language settings,
SleepTimer, HDD Spindown, Media server settings, BitTorrent settings, Time
Machine configuration, Web Server, and MySQL Server.
Note:
The following tasks require a [Confirm Operation] screen.
• Delete Folder
• Restore LinkStation
• Format LinkStation
• Erase Disk
Enter the number shown in the [Confirmation Number] field within 60 seconds,
and click [Apply].
Erase
Erase
Clicking [Erase] will erase data completely on the hard drive of the LinkStation.
Notes:
• All data will be erased. There is no “undo” for this!
• While erasing, the settings for the LinkStation cannot be changed.
SleepTimer
Click [Modify Settings]
to change settings.
Timer Interval
Select Sleep Timer interval from [Disable], [Everyday], or
[Specific day of the week]. If selecting [Specific day of the
week], specify the day by clicking the check box of the day.
Timer can be set from 1 - 3.
Wake up at
Specify a wake-up time for the LinkStation to recover from
sleep mode and resume its normal state. Times from 0:00 to
23:45 are allowed.
Begin Sleep at
Specify a time for the LinkStation to move from its normal
functionality to a standby state (“sleep mode”). Times from 0:00
to 27:45 are allowed.
Note: The wake-up time must be later than the beginning
time.
