Buffalo LinkStation LS-CHL Скачать руководство пользователя страница 203

Страница: 203 / 214

LinkStation User Manual

202

Appendix

The Info/Error LED blinks red to indicate an error. The error may be identified by the pattern of

blinking.

Note:

The error may also be viewed from NAS Navigator2.

Error code Descriptions

E04

The firmware is corrupted. Contact Buffalo technical support for assistance.

E10

The LinkStation is running on the UPS battery due to a power outage. The system

will now be shut down safely. Check that power is being supplied to the UPS, and if

there are no problems, turn on the LinkStation.

E11

An error occurred in the fan speed. Check that no foreign objects or dust are

clogging the fan. If any foreign objects or dust are found, use a pair of tweezers, air

duster, or other tool to remove them. If the error is displayed again, contact Buffalo

technical support for assistance.

E12

System temperature has exceeded the maximum safe value. Do not place objects in

the area around the LinkStation. Also, move the LinkStation to a cooler location.

E13

An error occurred in the RAID array. It will run in degraded mode until the error is

corrected. Contact Buffalo technical support for assistance

Place

Status

10s place

The LED illuminates for 1.0 second every 0.3 seconds.

The number of flashes is the tens place of the error code.

1s place

The LED illuminates for 0.5 seconds every 0.3 seconds.

The number of flashes is the ones place of the error code.

I28

Formatting a USB hard drive.

I46

Data migration or conversion (RAID migration) is in progress. Do not turn

off the LinkStation power.

I47

Data migration or conversion (RAID migration) is in progress. Do not turn

off the LinkStation power.

Info/Error LED glowing amber

When new firmware is available, the Info/Error LED will glow amber. Update the firmware as

described on page 112.

Содержание LinkStation LS-CHL























































































































































































































Результаты поиска

Содержание LinkStation LS-CHL

Отзывы:

Похожие инструкции для LinkStation LS-CHL

Бренды по названию

Популярные бренды

Buffalo LinkStation LS-CHL, Руководство пользователя

Результаты поиска

Содержание LinkStation LS-CHL

Отзывы:

Похожие инструкции для LinkStation LS-CHL

Бренды по названию

Популярные бренды