Buell 2007 ULYSSES, Руководство по обслуживанию, Страница: 350 / 647

2007 Buell Ulysses: Fuel System 4-1
HOME
SPECIFICATIONS 4.1
TORQUE VALUES
Table 4-1. Fuel System Specifications
FUEL SYSTEM TYPE
Intake (XB12)
49 mm downdraft manifold, ram air
Fuel delivery DDFI fuel injection
Fuel pressure 49-51 PSI (338-352 kPa)
Recommended fuel 91 Octane
Table 4-2. Fuel Tank Specifications
FUEL TANK CAPACITY GALLONS LITERS
Total (including reserve) 4.4 16.7
Reserve/Low fuel indicator at 0.83 3.1
Table 4-3. Idle Speed Specifications
ADJUSTMENT RPM
Normal idle speed 1050 -1150 RPM
ITEM TORQUE NOTES
Air cleaner back plate fasten-
ers
84-120 in-lbs 9.5-13.6 Nm page 4-126
Bank angle sensor mounting
fastener
12-36 in-lbs 1.4-4.1 Nm page 4-103
Battery terminal hardware 72-96 in-lbs 8-11 Nm page 4-115
Cooling fan fasteners 12-36 in-lbs 1.4-4.1 Nm page 4-106
ECM mounting fasteners 36-60 in-lbs 4-6.8 Nm page 4-93
Engine temperature sensor 120-168 in-lbs 13.6-19 Nm page 4-102
Fuel cap retaining ring fasten-
ers
62-71 in-lbs 7-8 Nm page 4-116
Fuel pump drain plug 84-108 in-lbs 9.5-12.2 Nm page 4-107
Fuel pump screws 48-51 in-lbs 5.4-5.8 Nm page 4-114
Fuel rail fasteners 20-25 in-lbs 2.3-2.8 Nm LOCTITE 271 (red), page 4-120
Fuel supply line banjo fitting 84-108 in-lbs 9.5-12.2 Nm page 4-114
Fuel tank vent valve fasteners 39-41 in-lbs 4.4-4.6 Nm page 4-115
Ignition coil mounting screws 120-144 in-lbs 13.6-16.3 Nm page 4-99
Ignition rotor mounting bolt 43-53 in-lbs 5-6 Nm LOCTITE 243 (blue), page 4-98
Inner timer cover screws 12-20 in-lbs 1.3-2.3 Nm page 4-98
Intake flange screws 96-120 in-lbs 10.8-13.6 Nm page 4-121
Interactive exhaust actuator
fasteners
36-40 in-lbs 4-4.5 Nm page 4-126
Manifold to engine mount fas-
tener
90-120 in-lbs 10-13.6 Nm page 4-121
Oxygen sensor 40-45 ft-lbs 54-61 Nm LOCTITE ANTI-SEIZE, page 4-101
Throttle position sensor 12-15 in-lbs 1.4-1.7 Nm LOCTITE 222 (purple), page 4-105
Timer plate studs 15-30 in-lbs 2-3 Nm page 4-98