Buderus Logalux PL750, Инструкция по установке и обслуживанию

Страница: 3 / 36

1
Safety Precautions and symbol clarification
Logalux PL750/2 S - Changes may be made following technical improvements! 3
1 Safety Precautions and symbol clarification
1.1 Safety Precautions
Placement, remodeling
V
Fire danger!
Solder and welding operations can result in fire, as the
insulation is combustible.
V
The solar combi-tank can only be installed or renovated
by trained installers.
Installation and Start-up Procedure
V
Carefully follow these installation instructions, to
ensure long and trouble-free operation.
V
Do not assemble the equipment in a damp environ-
ment.
Function
V
Follow these directions for trouble free operation,
installation and maintenance.
V
Scalding danger!
WARNING! Danger of scalding (> 140 °F) from hot
water. A thermostatic tempering valve must be installed
on domestic hot outlet connection of tank, which is sup-
plied with the KS Solar Pump Station.
Maintenance
V
Recommendation for end customer: Please sign
up for an annual service and maintenance contract with
your installer. Make sure to have annual maintenance
performed on your boiler and solar system.
V
Use only original Buderus replacement parts.
1.2 Symbol Clarification
Signal words are describing the gravity of each danger
when safety precautions are not followed.
– Caution indicates possibility of light property damage.
– Warning indicates light personal injury or severe prop-
erty damage.
– Danger indicates possible severe personal injury with
potential loss of life.
Guidelines contain important information in order to avoid
or reduce danger to people and equipment.
If the solar storage tank will be installed in Massachusetts,
it must be installed by an a licensed plumber, installer or
dealer who is registered in that state.
Safety warnings are designated in the text
with a triangular warning label and grey color-
ing.
Guidelines in the text are designated with
shown symbol. The text is bracketed between
two horizontal lines.
We reserve the right to change and improve
technical information without prior notice.
It is expected that the installer is a licensed
heating contractor with the knowledge of ac-
cepted industry practices for the installation
and maintenance of the equipment and vari-
ous applications of the equipment involved.