btsr WINDINGFEEDER, Руководство по эксплуатации

Страница: 8 / 47

Overview
- 1.2 - WINDINGFEEDER
An excessive increase of the temperature could infact indicate a wrong use of the
device; for this reason, the software on board of device performs a continuous
monitoring of the internal temperature.
If such temperature exceeds 100°C, an alarm message
(ERROR °C) appears in the
graphic area of LCD, and the Stop output is activated.
Safety
Thanks to a configurable safety code, all parameters can only be changed by
authorized staff knowing such safety code.
External control
The WINDINGFEEDER device may easily be programmed also using the SMART
MATRIX FEEDER terminal which, thanks to its flexibility, allows programming
of many devices at a glance. Once you have chosen the desired working values on
a given machine, you will just transfer the selected setting data to the SMART
MATRIX FEEDER and then to other devices installed on different machines; all
this in about 1 second
(i.e. the time needed to complete the data transfer).
User friendly installation and management
The WINDINGFEEDER is quite compact (290 x 86 x 94 mm). This permits you to
install several devices on the same machine with limited encumbrances. The device
has been designed bearing in mind not only the technological aspects, but also the
ergonomic ones. Thanks to these characteristics, the device can be perfectly fitted
within the machine structure, without compromising the machine spaces which are
usual to the operator.
Usable with any type of yarn
The WINDINGFEEDER device can work with a wide range of yarns, including
very thin yarns such as bare and covered elastomers, always guaranteeing a perfect
control of yarn tension values chosen by the user, which results in a high quality of
the manufactured product.
The WINDINGFEEDER device considerably reduces the preparation tasks, thanks
to a single self-threading ceramic eyelet that makes the operator job easier.
The tension value displayed on LCD indicates the actual tension with which the
device is working. This guarantees a constant and accurate monitoring of the
working process.
Easy to program
Possibility of viewing and selecting directly from the navigation menu the desired
application
(rewind 1/2, warp 1/2, etc.) without the need of manually setting the
relevant parameters.