btsr WINDINGFEEDER, Руководство по эксплуатации

Страница: 28 / 47

Operation
- 3-6 - WINDINGFEEDER
Advanced Programming of WINDINGFEEDER Devices
With the
ADVANCED
programming environment, each WINDINGFEEDER can be
programmed with specific control parameters which depend on the type of yarn under
processing, and on the type of application.
•
MAIN TENSION
Control Tension
•
ERROR TENSION
Tolerance beyond which an Error is generated
•
TIME ALARM
Time for which the tension may stay out of tolerance
•
EXIT TENSION
Device Tension with machine stationary
•
RAMP UP
Raising ramp in case of tension increase
•
RAMP DOWN
Lowering ramp in case of tension decrease
•
K-PID
Reactivity constant of the device
In addition, you can program particular functions and/or service parameters that affect the
device operating mode:
•
APPLICATION
Device operating mode, pre-defined according to the
application. The following pre-defined applications are
currently available:
REWIND
1/2,
WARP
1/2.
•
YARN TYPE
Possibility of presetting the device for management of
elastic yarns
•
OFFSET
Possibility of reading/setting the
OFFSET
value as well as
enabling the device Auto Offset function.
•
ACCESS CODE
Possibility of setting a protection password to prevent
undesired access to the device programmable functions.
•
U-FEEDER CODE
Possibility of visualizing and/or directly setting the device
identification code.
•
LANGUAGE
Possibility of choosing the language used to show the
message on the device display.
•
SIGNAL POLARITY
Possibility of choosing the
INPUT
and
STOP
signal polarity
( NO or NC contact) .
The setting of these parameters is already done by BTSR during the device manufacturing
(default values) , however it can be easily changed by the textile machine operator, to meet
specific requirements, using the advanced programming features.
WINDINGFEEDER devices offer 4 advanced programming levels: P1, P2, P3 and P4 ,
clearly indicated in the messages area of LCD during the programming sequences.
Within the
P1 level the following parameters can be programmed:
ƒ
MAIN TENSION
ƒ
ERROR TENSION
ƒ
TIME ALARM
Within the
P2 level the following parameters can be programmed:
ƒ
EXIT TENSION
ƒ
RAMP UP
ƒ
RAMP DOWN
ƒ
K
-
PID