btsr WINDINGFEEDER, Руководство по эксплуатации

Страница: 40 / 47

Operation
- 3-18 - WINDINGFEEDER
P4.3
BAUDRATE
This parameter allows you to setup the communication speed on the
WINDINGFEEDER serial interface.
[Allowed values: 57600 or 115200]
or to choose the desired speed.
to confirm the speed shown on display and move to the next parameter.
P4.4
APPLICATION SELECTION
This function allows you to choose one of the pre-defined applications.
or to choose the desired option:
REWIND
1,
REWIND
2,
WARP
1 or
WARP
2.
to confirm the application shown on display and move to the next parameter.
P4.5
ELASTIC
This function allows you to set the yarn characteristics.
or to choose between
ELASTIC
* or
ALL YARN
options.
to confirm the application shown on display and move to the next parameter.
* The
ELASTIC
mode allows a better handling of bare elastic yarns.
P4.6
LANGUAGE SELECTION
This function allows you to select the language used to display menu items,
messages and errors.
or to scroll forward/backward the list of available languages:
ITALIANO
–
ENGLISH
–
FRANCAIS
–
ESPANOL
–
DEUTSCH
–
JAPANESE
to confirm the language indicated on display and return to the beginning of P4
menu.
P4.7
SIGNAL POLARITY
This function allows you to setup the polarity of
INPUT
and
STOP
signals.
to toggle the
INPUT
signal between NO and NC.
to toggle the
STOP
signal between NO and NC.
to confirm the option shown on display and move to the next parameter.
Both: Inputs and Outputs can be programmed as normally open (NO) or
normally closed (NC) contacts. The programming is global, i.e. every input
(and every output in the same way) operates as NO or NC, depending on the
selected option.