btsr WINDINGFEEDER, Руководство по эксплуатации

Страница: 24 / 47

Operation
- 3-2 - WINDINGFEEDER
3. + PUSH BUTTON (CONTROL)
Press this push-button to temporarily de-activate the device (lighting of front/rear
LEDs and of ENTER, RESET, CONTROL push-button LEDs); press it again to
reactivate the device. This button also allows de-activating (OFF) the power unit.
During the programming phase, press it to increase the value of displayed
parameter.
Press this push-button whenever you need to operate on the device (i.e.
for yarn threading, coil separation device adjustment, etc.) to avoid
undesired start-up of the motor.
During normal operation, the three buttons (ENTER, RESET and CONTROL)
show the green LEDs on.
In case of alarm, the LEDs turn to red.
4. LCD DISPLAY
It provides the real time display of measured and adjusted tension values, as well as
the parameters programmable within the various menus, programming and error
messages, device status, etc.
Symbols shown on LCD
A – Area Etichette
OK Indicates the activation of any of the 3 push-buttons of WINDINGFEEDER device.
COM Communication in progress with SMART MATRIX FEEDER terminal or with the PC.
CONTROL Indicates that the WINDINGFEEDER device is operating in Control status.
PROGRAM Indicates that the WINDING FEEDER device is in Parameters Programming status.
TARGET
Indicates that the set Target has been reached.
INC
DEC
Indicates with 1 flashing the increment of main tension.
Indicates with 1 flashing the decrement of main tension.
P1
P2
P3
P4
P5 In Control environment indicates that the operating tension is the one defined in P1 (
MAIN TENSION
).
In Control environment indicates that the operating tension is the one defined in P2 (
EXIT TENSION
) .
Indicates the exclusion input activation.
It indicates the detection of an optional accessory.
Indicates Auto-Offset procedure in progress.
B – Area Messaggi
It shows, in the selected language, the various programming menu items, as well as the error messages
during the device operation, the yarn feeding speed
(LFA nnnn) , the device internal temperature, etc.