BTS FREEEMG 300, Руководство пользователя

Страница: 37 / 120

35
BTS Bioengineering
BTS FREEEMG
system components
sufficiently charged by unplugging it from the power supply unit
and turning it off and then back on.
There are two ways to recharge the probes:
• using the medical power supply unit from the network
• using the internal battery
The first method involves the connection of the Docking Station by means
of the AC/DC adaptor to the mains.
In this case not only the connected probes will be charged but also the
internal batter of the unit itself.
The second method lets you recharge the probes and/or the receiving
unit when you are not at the laboratory and a mains power network is
unavailable.
In particular with the battery fully charged you can fully recharge all the
probes and receiving unit or fully charge the probes only twice.
To recharge a probe simply connect it as described in the method above.
Connection to the Docking Station resets the probe if charged
less than 90%, to use it again for acquisitions you must repeat the
activation procedure.
The Docking System is equipped with an “Activate” button and 3 status
LEDs: “Charge”, “Battery” and “Power”.