BTS FREEEMG 300 Скачать руководство пользователя страница 12

Страница: 12 / 120

BTS

Bioengineering

BTS

FREEEMG

We recommend to carry out any kind of operation keeping strictly

to the security regulations contained in this manual.

BTS FREEEMG 300 is a medical device (EU Directive 93/42/CE and its

amendments, including Directive 2007/47/CE) which use must be at all

times be supervised by qualified and authorized personnel, according to

the laws in force in the nation it is in use.

The results of the acquisitions must be assessed by people legally authorised

by national law, who possess the suitable necessary knowledge of anatomy

and muscular function.

The uses of the device for other purposes and with methodologies different

from of those indicated in this manual are not to be considered congruent

with the precise use of the device.

- Use the product according to the usage that it has been

intended.

- Avoid connecting the probes to the charger with inverted polarity

with respect to that shown on the cover of the recharger - this

could cause irreparable damage to them.

- To not wet or dip in water the parts that make up the system.

warnings

Содержание FREEEMG 300
























































































































Результаты поиска

Содержание FREEEMG 300

Отзывы:

Похожие инструкции для FREEEMG 300

Бренды по названию

Популярные бренды

BTS FREEEMG 300, Руководство пользователя

Результаты поиска

Содержание FREEEMG 300

Отзывы:

Похожие инструкции для FREEEMG 300

Бренды по названию

Популярные бренды