BTS FREEEMG 300, Руководство пользователя

Страница: 28 / 120

26
BTS Bioengineering
BTS FREEEMG
system components
about 3 seconds its carries out a scan of the frequencies. During
the scan the green LED flashes quickly.
• Active-Connected: Green LED which flashes slowly.
When the probe and the receiving station establish a connection,
the green LED begins to pulse slowly: the probe is waiting for
commands. If the connection is interrupted, the probe returns
to “Active-Scanning” mode and attempts to re-establish the
connection.
• Active-Capturing: Green LED which lights and goes out at
regular intervals.
During acquisition the green LED flashes at regular intervals of
approximately one second. At the conclusion of the acquisition,
the probe returns to the “Active-Connected” condition. If during
the acquisition, connection to the receiver unit is lost, the probe
continues to acquire, storing the data locally for one minute and
at the same time scans the assigned channel trying to reconnect
to the receiving unit.
If after one minute the scan is unsuccessful, the probe returns
to the “Active-Scanning” condition interrupting the storage of
data.
• Probe discharged: LED is off.
If the probe is completely discharged the LED does not display
any flashing cycle and is off.
The probes are charged by a dedicated charger to which the probes are
connected via their respective clips.