BTS FREEEMG 300, Руководство пользователя

Страница: 51 / 120

49
BTS Bioengineering
BTS FREEEMG
acquisition protocol
- in case a protocol has already been loaded it is possible to empty
out all the fields of the table for the protocol creation by clicking
on the “Clear All” button
-select the current field, i.e. “Field 1”
- enable the field putting the check near “Enable”
- choose the probe type “Channel type” to associate to the field
selected among the available options
Note that the protocols to use with BTS FREEEMG 300
must contain only EMG, EGN, FSW, however if you
select EMG it can only be the Surface type.
- specify the field “Signal description”, clicking on the arrow to
enter the list
- select the body side which the signal is refering to
- click on the “Assign” button.