DEVICE MENU | PAGE 29 OF 47
3.2.11
STYLE OF OPERATION
•
NEW STYLE OF OPERATION
Use this option for main units of the first series (manufactured in 2001 and start of 2002). These devices have the
knobs (
11
) and (
12
) marked as
time
(
11
) and
start / stop
(
12
). It is necessary for these devices to select the
option
new style of operation
=
no
after download of the new version of firmware.
New units are preset by the manufacturer to a new operation mode (
new style of operation
=
yes)
.
•
END OF THERAPY – SETTING ZERO INTENSITY / TIME
After the end of the therapy you can choose, if you want to leave the adjusted data of time and intensity on the
screen in zero values, or display the values of the last performed therapy.
•
REPEAT SOUND FOR END
This item can switch on / off the function of repeated warning tone of the therapy end.
3.2.12
SETTING OF HW KEY
The device can be remotely configured. For example, if you later decide to purchase the upgrade, the
manufacturer (distributor) will send you 64 -digit code (so - called
HW key
) that you will enter and the device will
reconfigure its hardware according to the entered key. For the actual HW configuration see the chapter
Unit
information.
3.2.13 UNIT
INFORMATION
This item shows certain information about the device – serial number, device type, firmware version, etc. It also
contains the information up to when the device will operate – so called "device validity". If the operation of the
device is time limited, this item indicates until which date the device stays fully functional.
3.2.14 UNLOCK
CODE
If the operation of the device is time limited, then in this item you can enter the so-called "unlocking code" for
cancellation of the operational time limitation of the device.
3.2.15 SERVICE
FUNCTIONS
•
REPAIR OF FILES
This checks the file system in the device - system of saved information and repairs possible errors - deletes
empty files, etc. We recommend using this feature in the case of lack of memory, if the device rejects to save any
data, or if you are in doubt that some data may have been lost, etc.
•
FILE SYSTEM FORMATTING
If the feature
repair of damaged files
did not help you, select this function. Unfortunately, together with this
formatting you will loose all the user data and user setup of the device.
•
DELETE ACCESSORIES
This item will delete all the installed accessories – use it, when you install the accessories incorrectly – e.g. bad
„scattered" picture on the tab, the connected accessories cannot be detected (permanently displayed
question
mark
) etc.
•
DEFAULT SETTING WITHOUT LOSS OF USER DATA
Restoration of all functions of the device the way they were preset by the manufacturer. User data – clients,
therapies etc. will stay saved.