INSTRUCTIONS FOR USE | PAGE 17 OF 47
2.5.2
WELCOME SCREEN AND SELECTION OF CHANNELS, TABS AND ACCESSORIES
After switching the device ON, the entry screen includes information on the channel tabs with icons of connected
accessories. The number of channels - tabs dependents on the required configuration of the device. By pressing
the tab, information of the actual channel displays. Information adjusted on the „invisible channels" will definitely
remain saved. Almost the full screen is available for the "selected channel" - see the picture.
Switching the channels:
To switch between the connected accessories, press the W1 tab, see the picture. If both shockwave accessories
are connected, then the channel W1 displays the tab of accessories connected to the input
out A
(
39
), and by
pressing it, information on accessories connected to the input
out B
(
39
) will display.
Examples of information on the tabs:
Tab of channel W1 with no connected accessories
Tab of a selected channel W1, where the
shockwave therapy
can be applied with the connected
accessories BTL- 214-1 (
SWT A
)
Tab of a selected channel W1, where the
shockwave therapy
can be applied with the connected
accessories BTL- 214-1 (
SWT B
)
Tab of accessories connected to
the input out A (
39
)
Tab of accessories connected to
the input out B (
39
)