Commissioning
B 3
ekrPro Com
60
web guide controller
EDV No.:
MD.191.01.05/1.6.x Chapter:
B 3
with analog sensors
Date:
23.11.2007
Page:
26/73
B 3.7 Setup menu
The system parameters are saved in the Setup menu and they can
also be modified from here. The menu structure is shown in
Appendix D1.
B 3.7.1 Change User
Selection of user level-
User administration in the
ekrPro Com
60
differentiates between four
different user levels with different user rights.
The individual user levels are each protected by a password.
The procedure for selecting the user level is described in detail in
chapter B 3.4.
B 3.7.2 Material Setup - Sensor compensation
Automatic adjustment of the controller to match the characteristics of
the material to be scanned is carried out during material set-up
(e.g. different material transparency at the optical sensors or
different sound absorption in the case of ultrasonic sensors).
The procedure for material setup is described in chapter C 2.3.
B 3.7.3 Sel. Std. System –
Selection of a standard system
To simplify commissioning, the commissioning staff can select his
own system from a list of the most common standard systems listed
under the menu "Sel. Std. System".
Following the selection, all of the basic settings are automatically
entered in the setup menu.
The procedure for selecting a standard system is described in detail
in chapter B 3.5.
B 3.7.4 Save/Load Settings
You can use this function to save user-defined settings in the system
and call them up again. This gives you the facility for accessing them
at any time in the case that modifications have been carried out
unintentionally or by unauthorized persons.
The procedure for selecting a standard system is described in detail
in chapter B 3.6.
