Bruno SRE-1550 Electra-Ride II, Руководство по установке

Страница: 46 / 76

©2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1550 UL 06-18-2004
46
OVERSPEED-COMMERCIAL UNITS ONLY
ALIGNMENT
RESETTING THE OVERSPEED
If the overspeed is tripped during installation
or service operations, reset the cam by
rotating it back to its detent position.
By by-passing the overspeed switch and
running up the drive unit, it is possible to
manually rotate the cam.
In the event of a failure which activates the
overspeed, it will be necessary to remove
the complete drive unit from the rail, and to
return the unit to the dealer or manufacturer
for diagnosis and repair before putting the
unit back into service.
INSTALLATION
align
looking at end of
carriage
Before installing the carriage, the overspeed
cam must be adjusted to line up with the
overspeed housing.
Looking at the end of the carriage, align the
white mark on the cam with the white mark on
the overspeed housing.
Slide the carriage on the rail, making sure not to
alter the alignment.