Bruno SRE-1550 Electra-Ride II, Руководство по установке

Страница: 30 / 76

©2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1550 UL 06-18-2004
30
•
Depress the DOWN transmitter button (if the carriage is at
the top of the rail), or the UP transmitter button (if the
carriage is at the bottom of the rail). If the carriage moves,
the new configuration has been accepted and the
transmitter relearned.
9) Make sure both transmitters are set to the same switch configuration.
10) Reassemble and secure the transmitter back (remount on wall if
applicable).
11) Reassemble and secure the carriage cover.
NOTE:
While using the remote
call/send, you may
experience some
intermittent operation.
This will not harm the unit.
However, while using the
rocker switch, operation
should NOT be
intermittent.
8) Once you have changed the switch positions:
Turn on the CARRIAGE circuit breaker.
Wait until you hear a BEEP.
Press and hold the LEARN switch on the CARRIAGE circuit
board.
The red LED on the carriage circuit board will glow.
AS YOU HOLD DOWN the LEARN switch, press one of
theTRANSMITTER pushbuttons.
When the red LED on the carriage circuit board goes out,
release the LEARN switch and the transmitter pushbutton.
•
•
•
•
•
•
INSTALLATION