Bruno SRE-1550 Electra-Ride II, Руководство по установке

Страница: 24 / 76

©2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-1550 UL 06-18-2004
24
The final limit switch and actuation ramp assembly is a safety feature which enhances
the stopping capability of the Elevator. The actuation ramp is to be mounted to the
side of the rail, 1" from the top of the rail in a LEFT-HAND installation. In a RIGHT-
HAND installation the mount the ramp 8" from the top end of the rail. Tighten M6 X 10
hex head screws on bottom of ramp.
tighten
M6 x 10 hex
head cap screws
measure the
distance from the
end of the rail to the
inside edge of the
actuation ramp
1" LH
8" RH
FINAL LIMIT SWITCH AND ACTUATION RAMP-RESIDENTIAL AND COMMERCIAL UNITS
NOTE:
FAILURE TO ADJUST LIMIT SWITCHES WILL NOT AL-
LOW UNIT TO CHARGE.
REVERSING CARRIAGE
The limit switches on the end of the carriages require adjustment:
• Lengthen the switch on
the upper end of the carriage.
• Shorten the switch on
the lower end of the carriage.
INSTALLATION