manualshive.com logo in svg

Brother HL- SERIES, Техническое справочное руководство, Страница: 85 / 392

Поделиться
Скачать
Brother HL- SERIES Скачать руководство пользователя страница 85

Revision C 16/01/96

Chapter 2 "PCL" - 70

Set pattern transparency

Esc*v#O

(27)(42)(118)#(79)

<1Bh><2Ah><76h>#<4Fh>

• 

This command sets the pattern transparency.

• 

# is either 0 or 1. Set # to 0 to select transparent mode, and to 1 to specify opaque mode.

• 

Transparent mode means that parts of the destination image will be visible through the patterned areas of the
source image when the source image has been printed on top of the destination image. If the pattern is a solid
black fill obviously you will not be able to see any of the destination image through the patterned areas of the
source image.

• 

Opaque mode means that the destination image will not be visible through the patterned areas of the source
image when the source image has been printed on top of the destination image.

For example

Pattern

Source image

Destination image

Possible results

With transparent

pattern

With opaque

pattern

(Source image is transparent)

Содержание HL- SERIES









































































































































































































































































































































































































Отзывы:

Нет отзывов