Brother HL- SERIES, Техническое справочное руководство, Страница: 138 / 392

Revision C 16/01/96
Chapter 3 "PJL" - 15
•
If job status is available and a JOB command is received, the printer returns a job status message.
•
NOTE: Resetting the page count according to unsolicited page status information does not affect the
current page.
Example :
<ESC>%-12345X@PJL<CR><LF>
@PJL JOB NAME = "KKK data from spooler" <CR><LF>
<ESC>%-12345X@PJL<CR><LF>
@PJL COMMENT Postscript Job <CR><LF>
@PJL JOB NAME = "YYY data from spooler 2" <CR><LF>
@PJL ENTER LANGUAGE = POSTSCRIPT <CR><LF>
%!PS.......PS JOB........^D
<ESC>%-12345X@PJL<CR><LF>
@PJL EOJ NAME = "End of YYY data" <CR><LF>
<ESC>%-12345X@PJL <CR><LF>
@PJL ENTER LANGUAGE = PCL <CR><LF>
<ESC>E.........PCL JOB........<ESC>E
<ESC>%-12345X@PJL <CR><LF>
@PJL EOJ NAME = "End of KKK" <CR><LF>
<ESC>%-12345X@PJL <CR><LF>
5.3. EOJ Command
The EOJ command indicates to the printer that the job is completed. Use this command whenever you
use the JOB command.
NOTE: JOB and EOJ command always are used in pairs. You should not use one without the other.
Syntax :
@PJL EOJ [ NAME = "job name" ] [<CR>]<LF>
•
NAME = "job name"
The EOJ command can name the print job. The job name is a string and must be enclosed in
double quotes in the command syntax. The job name need not be same as the "job name" of the
JOB command. If the NAME option is described, the unsolicited end-of-job status includes the job
name. Job names can use printable characters(ASCII 33-255) and spaces or horizontal tab
characters up to a maximum of 80 characters.
•
The EOJ command indicates the end of job.
•
Resets the PJL Current Environment variables to the default values.
•
Terminates the non-printing mode.
•
When the EOJ command is received, the printer returns unsolicited job status information.
•
The EOJ command resets the page number associated with unsolicited page status.