manualshive.com logo in svg

Brother HL- SERIES, Техническое справочное руководство, Страница: 159 / 392

Поделиться
Скачать
Brother HL- SERIES Скачать руководство пользователя страница 159

Revision C  16/01/96

Chapter 3 "PJL"  - 36

7.3. DINQUIRE Command

The DINQUIRE command is used so as to get the information of the default value of a specific variable
in the PJL Environment. (User Default Settings).   It is also possible to get the value from variables
which PJL can not change (Read-only).
The returned value of User Default Settings is identical to the Control Panel Setting.
This DINQUIRE command can request only one variable at a time.  If you would like to get
information from more variables, send multiple DINQUIRE commands.

Syntax :

@PJL DINQUIRE [LPARM : 

personality

] 

variable

[<CR>]<LF>

Response Syntax :

@PJL DINQUIRE [LPARM : personality] variable
<CR><LF>
value <CR><LF>
<FF>

If the variable is not supported by the printer, it returns the response in the following syntax :

@PJL DINQUIRE [LPARM : 

personality] variable <CR><LF>

"?" <CR><LF>
<FF>

• 

LPARM : personality
This optional parameter must be used when requesting information about printer language-specific
variables such as the font number in the User Default setting.

• 

variable
Variable is a parameter which specifies what you would like to get the information about, among the
User Default settings (User Default Environment).  The valid variables are listed in the following
tables.

• 

value
Value is the returned value for the requested variable.  See the tables following to learn about values
for specific variables.

Содержание HL- SERIES









































































































































































































































































































































































































Отзывы:

Нет отзывов