manualshive.com logo in svg

Brother HL- SERIES, Техническое справочное руководство, Страница: 338 / 392

Поделиться
Скачать
Brother HL- SERIES Скачать руководство пользователя страница 338

Revision C 16/01/96

Chapter 9 "HP-GL" 11

PD - Pen Down

PD [ X, Y [,...]] [;]

X ; X coordinate of the cursor movement destination

Y ; Y coordinate of the cursor movement destination

• 

X and Y are either relative or absolute, depending on whether a PA or a PR was the last plot command
executed.  The absolute coordinates are set as default.

• 

Moves the cursor to the specified coordinates after lowering the pen. (This plots a straight line.)

• 

Using this instruction without a parameter lowers the pen without changing the cursor position.  ( One dot
is plotted.)

• 

When scaling has been performed,  the cursor is moved by user coordinates.

• 

Also, when scaling has been performed, the values for X and Y are real numbers.

• 

When there is no scaling,  the cursor is moved by absolute coordinates in graphics units.

• 

When there is no scaling, the coordinate values for X and Y are integer numbers.

Current position

(X1, Y1)

(X2,Y2)

(X3, Y3)

(Xn, Yn)

Содержание HL- SERIES









































































































































































































































































































































































































Отзывы:

Нет отзывов