manualshive.com logo in svg

Brother HL- SERIES, Техническое справочное руководство, Страница: 317 / 392

Поделиться
Скачать
Brother HL- SERIES Скачать руководство пользователя страница 317

Revision C 16/01/96

Chapter 8 "HP-GL2"  51

DT - Define Label Terminator

DT [ 

c [, m ]] [;]

c : Character
m : mode

• 

This command allows you to specify the character that terminates strings printed with the LB instruction.

• 

The character immediately following DT is taken to be the terminator.  Hence,  do not put a space between
the DT and your chosen character.  If you do,  space will be interpreted as the terminator in all subsequent
LB commands.

• 

m, the mode,  determines whether the terminating character is printed as part of the label or not.  If m = 0
the character is printed ; if m = 1 it is not.

• 

If you do not specify a value for m the terminating character is not printed.

• 

If you leave out the character parameter the default character ETX (ASCII 3 ) is used as the terminator.

• 

This setting is effective until the another DT is invoked or IN or DF is performed.

10 REM - Define Label Terminator -
20 WIDTH "LPT:", 255
30 LPRINT CHR$(27); "E";
40 LPRINT CHR$(27); "%0B";
50 LPRINT "IN;SP2;";
60 LPRINT "IN;SP2;SC0,5000,0,5000;"
70 LPRINT "PA0,4500;LBDefault control character ETX"; CHR$(13);CHR$(3);
80 LPRINT "LBterminates by performing end-"; CHR$(13);CHR$(3);
90 LPRINT "LBof-text function.";CHR$(3);
100 LPRINT "PA0,3500;DT@;LBPrinting characters terminate,"; CHR$(13);
"@";
110 LPRINT "LBbut are also printed.@";
120 LPRINT "PA0,3000;DT"; CHR$(7); "LBcontrol characters terminate";
CHR$(13);chr(7);
130 LPRINT "LBand perform their function."; CHR$(7)
140 LPRINT CHR$(27); "%01";
150 LPRINT CHR$(27); "E";
160 END

<Sample 52>

Содержание HL- SERIES









































































































































































































































































































































































































Отзывы:

Нет отзывов