manualshive.com logo in svg

Brother HL- SERIES, Техническое справочное руководство, Страница: 14 / 392

Поделиться
Скачать
Brother HL- SERIES Скачать руководство пользователя страница 14

2

About the manual

This technical reference manual is intended to help you get the most out of each of the emulation
modes supported by your HL Series laserprinter. It is divided into nine sections - this introductory
section and one section for each of the emulation modes. Each emulation mode section describes the
software commands (the escape sequences and control codes) that you can use to make the printer
perform each of its available functions. Some example programs are included to give you useful
ideas.
This manual is for our PCL5 models.  For the differences between each model,  see the Appendix
"Model Comparison."

For basic set-up information, such as how to connect the printer to your computer, look in the User
guide. The User guide also describes the printers control panel and how you can set various options
using the keys.

Areas of use

There are several different applications for which you may want to use your HL Series laserprinter.
Four general areas are outlined in the following sections.

U

SING WORD

-

PROCESSING PACKAGES AND SPREADSHEETS

You may simply wish to use the printer with your software application packages, such
as word-processors or spreadsheets. Many software packages automatically send
commands to the printer requesting particular type styles, character sizes and
specifying page set-up information and other relevant data. In this case you will not
need to use this manual, as your software package will perform the task of controlling
the printer for you. Other packages allow you to embed software commands within
your word-processed or spreadsheet documents. This manual describes the commands
you need, and you can simply include them in the form that your package requires. In
either case, read the documentation that came with your software to find out its own
specific requirements for driving a printer.

Содержание HL- SERIES









































































































































































































































































































































































































Отзывы:

Нет отзывов