manualshive.com logo in svg

Brother HL- SERIES, Техническое справочное руководство, Страница: 153 / 392

Поделиться
Скачать
Brother HL- SERIES Скачать руководство пользователя страница 153

Revision C  16/01/96

Chapter 3 "PJL"  - 30

6.4. Initialize command

The INITIALIZE command resets the PJL Current Environment and User Default Environment
variables to the Factory Default values. I/O configuration values and the unsolicited status settings are
not affected by this command.

It is recommended to restrict the use of the INITIALIZE command when the printer is shared by several
users such as in a networking environment in order to use a standard environment and avoid having
default features changed by different print jobs.

Syntax :

@PJL INITIALIZE [<CR>]<LF>

Parameters :

• 

The INITIALIZE command has no parameters.

• 

The INITIALIZE command resets the following environment variables to the Factory Default
values.

• 

If any additional personality (emulation) is added to the printer, the printer may support more
personality-specific variables than the variables listed above.  In any case, the INITIALIZE
command resets the PJL Current and User Default environment values for all personalities to their
factory default.

Example :

<ESC>%-12345X@PJL <CR><LF>
@PJL COMMENT setting to <CR><LF>
@PJL COMMENT factory defaults <CR><LF>
@PJL INITIALIZE <CR><LF>
<ESC>%-12345X

Содержание HL- SERIES









































































































































































































































































































































































































Отзывы:

Нет отзывов