manualshive.com logo in svg

Brother HL- SERIES, Техническое справочное руководство, Страница: 62 / 392

Поделиться
Скачать
Brother HL- SERIES Скачать руководство пользователя страница 62

Revision C 16/01/96

Chapter 2 "PCL" - 47

Selecting a downloaded font

Esc(#X

(27)(40)#(88)

<1Bh><28h>#<58h>

• 

This command selects a downloaded font as the primary font.

Esc)#X

(27)(41)#(88)

<1Bh><29h>#<58h>

• 

This command selects a downloaded font as the secondary font.

• 

# is the ID number of the downloaded font.

Creating downloadable fonts

Downloading

You can download existing fonts (that is, ones that you have bought or ones that you have created previously)
using either a font downloading application program or the DOS command

COPY/b <filename> PRN

In addition, some word-processing and DeskTop publishing programs will automatically download the fonts that
have been used in a document when that document is printed.
Alternatively, you can create a new downloadable font and download the necessary blocks of data that comprise
the downloadable font using PCL commands.

To send a font,  you must send

* a font descriptor block followed by the character code
* a character descriptor
* data for each character

The printer can download 3 types of fonts.
Bitmapped fonts, Bound Scalable fonts, and Unbound scalable fonts.

Sending the font descriptor

Esc)s#W (font descriptor data) (27)(40)(115)#(58)

<1Bh><28h><73h>#<88h>

• 

This command sends the font descriptor to the printer.

• 

# should be in the range 0 to 32767.

• 

# is the number of bytes in the descriptor.

• 

Characters are designed on a notional grid known as the character cell. The positioning and shape of each
character on the grid defines its size, shape and alignment to the other characters in the font.

Содержание HL- SERIES









































































































































































































































































































































































































Отзывы:

Нет отзывов