Brother GTX-4, Инструкция по эксплуатации

Страница: 243 / 320

243
Troubleshooting
Probable Cause Remedy
Is the [Highlight:] of [White Ink Settings:] too low? With reference to "5-6-6. Print out of highlight check pattern
>>P.121", print the highlight check pattern to check the blurring,
and select appropriate set value for [Highlight:].
For details of [Highlight:] setting procedure, refer to "5-3-4. For
Graphix Lab: White ink settings >>P.75" or "5-5-3. For other
applications: White ink settings >>P.109".
Too much luster
Probable Cause Remedy
Are you using Teflon-treated peel-off sheet for
fixation? Use a silicon coated peel off sheet when curing the ink to reduce
the gloss.
Too fuzzy
Probable Cause Remedy
Did you touch the print media (T-shirt) just before
printing? Excessively touching the media (T-shirt) on the platen by trying to
flatten the media before printing could cause fuzziness. Make
sure not to touch the media surface too much after the
pretreatment is fixated.
Does it take a long time before printing, after the
pretreatment fixation? Leaving the print media (T-shirt) after fixing the pretreatment may
cause fuzziness, because the media would absorb water. Print
the pretreatment fixated media as soon as possible.
Is the upper iron on the heat press contaminated
during the pretreatment fixation process? If the upper iron is contaminated, it could roughen the print media
(T-shirt) surface by a heat press process, to cause fuzziness.
Clean the upper iron of the heat press with a cloth.
If the condition persists, try using a peel-off sheet during the
pretreatment fixation process, to probably improve the condition.
Unevenly dried during the fixation process? It may be solved by inserting a silicone foam between the heat
press lower iron and a print media (T-shirt) during ink fixation.
Background white ink spreads out when printed with [Color+White Ink]
Probable Cause Remedy
[White/Color Alignment] misaligned? Misalignment of white and color inks can occur when the media
thickness or the platen height is changed. Adjust the platen height
first, and align the white and color inks positions by referring to
"7-4-5. White/color alignment >>P.218".
Is the media easy to stretch when wet? Print misalignment may occur between white and color inks when
the media stretches when wet with white ink. Increasing [Choke
Width:] can prohibit spreading of the background white ink.
For details of [Choke Width:] configuration, refer to "5-3-8. For
Graphix Lab: White ink advanced settings >>P.80" or "5-5-7. For
other applications: White ink settings >>P.114".