Brother GTX-4, Инструкция по эксплуатации

Страница: 203 / 320

203
Precautions to keep good printing quality/use printer over the long term
7-2-4. Cleaning the CR (carriage) plate
Clean the carriage plate when it is contaminated with ink.
<TIPS>

You can use an already-used clean stick R.
(1) Make the clean stick R, cleaning cup, gloves and cleaning solution, which come standard with the printer, available
for use.
<IMPORTANT>

Never touch the tip end of clean stick R with your hand. If any sebaceous matter is attached to the head nozzle, it may
result in a printer malfunction.
(2) From the menu, select [Maintenance] > [Maintenance Part Clean/Replace], and press .
<IMPORTANT>

If any other error or message is displayed on the operation panel or warning message window, follow the message to solve
the problem, then perform the cleaning.
<TIPS>

Pressing causes the platen to start moving. Do not put anything around the platen.
(3) Follow the on-screen message and turn off the power.
<IMPORTANT>

Please complete the task within 20 minutes, in order to prevent the print heads from drying up.

When the task will take more than 20 minutes to complete, close the front cover and turn on the power, then select
[Maintenance Part Clean/Replace] again to restart the task. Then, a head cleaning will be performed to prevent any ink
from drying up.
(4) Open the front cover.
X0050
(5) Put a proper amount of cleaning solution into the cleaning cup.
Front cover