Brother GTX-4 Скачать руководство пользователя страница 195

Страница: 195 / 320

195

Precautions to keep good printing quality/use printer over the long term

(12)

Insert the two latches under the encoder cover and fix the cover with three screws.

(13)

Close the front cover.

(14)

Turn on the power.
<NOTE>



Dispose of any waste resulting from the cleaning in accordance with applicable laws and ordinances.

<TIPS>



Then, a head cleaning will be performed to prevent any ink from drying up.



Because the cleaning cup will be reused, rinse it in clean cleaning solution and store it in a safe place.

(15)

Adjust the carriage speed.
<TIPS>



For details, refer to "7-4-1. CR (Carriage) speed adjustment >>P.214".

(16)

Print out a nozzle check pattern.
<TIPS>



For details, refer to "7-2-1. Print out of the nozzle check pattern (checking on the print heads) >>P.198".

Содержание GTX-4

































































































































































































































































































































Результаты поиска

Содержание GTX-4

Отзывы:

Похожие инструкции для GTX-4

Бренды по названию

Популярные бренды

Brother GTX-4, Инструкция по эксплуатации

Результаты поиска

Содержание GTX-4

Отзывы:

Похожие инструкции для GTX-4

Бренды по названию

Популярные бренды