24
Setting up the machine
When setting up the machine, adjust the legs so
that the machine is steady.
a
Make sure that all packing tape affixed to
the machine is peeled off and that all
packing material is removed.
b
Set up the machine while making sure that
there is sufficient space around it.
c
Adjust the legs so that the machine is
steady.
Use the included wrench to loosen the lock nut on the
leg that you wish to adjust.
1
Lock nut
2
Adjustable foot nut
The foot can be turned.
Minimum of
50 mm
(2 inches)
587 mm
(23 inches)
More than
350 mm
(13-3/4 inches)
More than
250 mm
(9-1/32 inches)
512 mm
(20-5/32
inches)
More than
250 mm
(9-1/32 inches)
CAUTION
• In order to prevent malfunctions or damage,
do not set up the machine in a location
exposed to the following conditions.
• Insufficient space
• Liquids, such as water (
1
)
• Direct sunlight (
2
)
• Objects within the moving range of the
embroidery frame (
3
)
• Extremely high or extremely low
temperatures. The operating environment
should be between 5 °C (40 °F) and 40 °C
(104 °F). (
4
)
• Extreme dust (
5
)
• Blocked ventilation slots (
6
)
• An unstable surface (
7
)
• Connection to extension cords or multiple
adapters (
8
)
Note
• For your safety: Since the machine weighs
approximately 38 kg (84 lb), do not set it up
on an unstable table or desk.
1
2
3
4
5
6
7
8
Minimum of
50 mm
(2 inches)
587 mm
(23 inches)
More than
350 mm
(13-3/4 inches)
More than
250 mm
(9-1/32 inches)
512 mm
(20-5/32
inches)
More than
250 mm
(9-1/32 inches)
