Brompton Brompton Electric Mk.1, Руководство пользователя

Страница: 39 / 52

USING THE USB CHARGER
The USB port on the Brompton Electric battery is a power only connection, which is designed to charge
devices when required. This can be done on or off the bike and even when riding.
There is an opening in the luggage to allow the installation of a USB cable and for the device to be stored
in the bag while charging. The small battery bag, supplied with the Brompton Electric has an opening at the
top of the front zipped pocket (fig. 34) and the larger battery bag has an opening on the side of the battery
enclosure (fig. 35) inside the main compartment of the bag. If a handlebar device is being charged, hold the
cable when inserting the battery so that it protrudes from the battery cavity and then reach to the handlebars.
The notch in the side of the Brompton Electric battery is for strain relief (fig. 33) for the USB cable. This may
be used to control the cables in the bag and prevent damage if the battery is attempted to be removed with
the usb cable still attached.
The output is 5Vdc and a maximum charge current of 1.5A. This should be sufficient to charge larger devices
and tablets.
When the Brompton Electric battery display is illuminated the battery is turned on and the device will start
charging. If the current draw of the device is low (when the device is getting close to fully charged or if too
hot), the battery will cut off the connection and the device will stop charging.
If the Brompton Electric battery is low on charge, you should charge this before charging your device.
Do not connect any devices that supply voltage to the usb circuit. This may damage the battery and invalidate
the warranty.
Fig. 34 Fig. 35
39