Brompton Brompton Electric Mk.1, Руководство пользователя

Страница: 30 / 52

TORQUE 0.35Nm
SPACER
SHIFTER
BRAKE LEVER
Fig. 19
FITTING THE SHIFTER
The shifter mounts to the right hand brake lever, it
is held in place by two M3 screws, these should
be tightened to
0.35Nm . Do not overtighten the
screws as this can reduce the performance of the
shifter and damage the parts.
As standard a spacer (fig. 19) is fitted between the
shifter and brake lever. This spacer is vital to ensure
clearance between the shift lever and the grip.
On P-Type bikes and also on M, H & S-type bikes
using non-standard grips, the locking collar or grip
material can interfere with the lever operation, if the
spacer is not fitted.
REMOVING THE GEAR CABLE
• Select the highest gear (+)
• Release the cable from the cable connector (fig. 20) by loosening the grub screw
• Select the lowest gear (-) and then press the shift lever downward so it does not obscure the cable
entry hole
• Seperate the inner cable from the outer housing
• Push the inner cable through the barrel adjuster, until the cable end is fed out from the entry hole (fig. 5)
• Pull the cable from the entry hole until it is seperated from the shifter
GRUB SCREW
CABLE CONNECTOR
CABLE HOUSING
INNER CABLE
Fig. 20
30