Brompton Brompton Electric Mk.1, Руководство пользователя

Страница: 38 / 52

BATTERY CONNECTOR
BATTERY CONNECTOR COVER
The battery connector on the front mounting block is protected by a cover (fig. 32) to prevent
contamination from the elements, when the battery/bag is not fitted to the bike. It is still possible for
contaminants to get under the cover and they could prevent the battery connector from functioning
correctly.
It is recommended to regularly clean the battery connector. Push the cover forward to open it (fig. 32) and
using a dry, lint free cloth to wipe away any contaminants.
You should also check and clean the battery connector on the base of the battery (fig. 33), with a clean,
dry, lint free cloth.
Do not use contact-spray, detergents or lubricants on the battery connectors.
Fig. 32
Fig. 33
CABLE NOTCH
USB PORT
Do not submerge the bike, hub motor or battery in water; this can allow water to enter the motor, battery and
electrical systems. This could cause overheating bursting or ignition. Do not place the battery or bag down
on a wet floor, this could allow water onto the battery connector. Do not use the bike if it has been submerged
in water. Only clean the bike when upright and unfolded, do not clean the bike when upside down.
CLEANING THE BATTERY CONNECTION
38