Brompton Brompton Electric Mk.1, Руководство пользователя

Страница: 28 / 52

FITTING A NEW CABLE
• Select gear 1 then press the shift lever downward so it does not obscure the cable entry hole (fig. 15)
• Feed the gear cable into the shifter and through the cable bush
• If there is resistance pushing the cable through the bush pull the cable back a little and try again
• Once you can feel the cable pass through the bush keep feeding it until you feel slight resistance
• Keep feeding it through so that it follows around the guide inside the shifter and exits through the cable
barrel
DO NOT FORCE THE CABLE AS THIS MAY DAMAGE THE SHIFTER
INDICATOR CHAIN
CABLE ANCHOR
Fig. 14
CLAMP NUT
LOCKNUT
CABLE HOUSING
INNER CABLE
REMOVING THE GEAR CABLE
• Select gear 3 on the shifter, backpedal to engage the hub
• Unscrew the indicator chain locknut (fig. 14)
• Unscrew the indicator chain from the gear cable anchor
• Undo the gear cable anchor clamp nut and
release the inner gear cable
• If there is a cable crimp fitted to the cable end you will
need to remove this, then pull the cable out of the clamp
• Pull the cable housing away from the shifter
• Remove the inner cable from the cable housing
• Select gear 1 and then press the shift lever downward
so it does not obscure the cable entry hole
• Feed the gear cable through the shifter so that the
cable nipple ejects from the cable entry hole
• If there is resistance pushing the cable through the
bush pull the cable back a little and try again
• Keep feeding the cable through until the cable can be
fully removed from the shifter
Fig. 15
GUIDE
CABLE BUSH
CABLE ENTRY HOLE
SHIFT LEVER
CABLE BARREL
CABLE PULLEY
28