Brompton Brompton Electric Mk.1, Руководство пользователя

Страница: 47 / 52

FITTING THE WHEEL
Make sure the wheel is in the correct orientation with the
motor cable on the left hand side of the fork (fig. 48), next to
the plastic hook.
Push the axle into the dropouts, ensuring that the washer is
on the inside of the dropout and that the wheel is fully inserted
on both sides. Locate the tab-washers into the dropouts and
tighten both nuts to 18Nm. Check that the wheel rim is not
catching on the brake blocks and the tyre does not catch the
mudguard when the wheel is spun. If either of these occurs;
the wheel might not be properly aligned in the fork dropouts.
CONNECTING THE CABLE
There is a white arrow on the two halves of the connector (fig.
49), align these and push the two parts together, ensuring that
they go together smoothly, this should not require a great deal
of force. Push the silver ring on the lower connector up and
rotate it in an anticlockwise direction (viewed from the the rear
with the bike upright) screw the two pieces together fully to
secure the connector.
OPEN CLOSE
Fig. 49
ARROW
ARROW
METAL
CONNECTOR
47