Brompton Brompton Electric Mk.1, Руководство пользователя

Страница: 12 / 52

CHARGING THE BATTERY
MAINS ADAPTOR
MAINS ADAPTOR PORT
KEYWAY
BATTERY CONNECTOR CABLE
CHARGER DISPLAY
It is possible to charge the battery when mounted onto the bike or with the bag when removed from the
bike, or with the battery on its own, removed from the bag. If the bike is stored in a cold place, its best to
bring the battery into a warm room to charge.
Place the battery and charger onto a level surface, where they cannot be knocked or damaged and which
is non-flammable. Connect the mains adaptor to the port on the charger (fig. 3) you should use a mains
adaptor appropriate to the country you are in.
The charging port on the battery (fig. 5, 6) is located on the rear bottom left hand corner of the battery
pack behind a protective rubber cover. Lift the cover upwards, from the bottom edge to expose the battery
connector port. Once you have finished charging, remove the charger and ensure the port cover is properly
closed.
The battery connector cable has a keyway (fig. 3) which must be lined up to the corresponding feature at
the bottom of the connector port on the battery. Gently twist the connector until the keyway lines up and
firmly but carefully push the connector onto the battery.
CHARGER
CHARGING STATUS LIGHT
WARNING LIGHT
Fig. 3
Fig. 4
WEIGHT
The weight of the rider and luggage will have an effect on the battery range, decreasing the load by carrying
less nonessential items of luggage will allow you to improve the battery range.
USING THE CHARGER
It is important to use the charger and battery together in the correct order.
1. plug mains adaptor into the charger (fig. 3)
2. plug mains adaptor into wall socket (fig. 3)
3. plug charger into battery port (fig. 5)