Broan GSEH3K, Руководство по установке

Страница: 7 / 36

3. RECOVERY NEEDS ACCORDING TO GEOGRAPHICAL LOCATION
- 7 -
When recovery is important, it can be hard to find the appropriate unit. Use the map below to determine which between heat
recovery (GSHH3K model) or energy recovery (GSEH3K model) will satisfy the specific needs of the consumers.
HELENA
OLYMPIA
S ALEM
BOI S E
BI S MARCK
S ALT LAKE CITY
S T. PAUL
DE S MOINE S
MADI S ON
HARRI S BURG
S ACRAMENTO
DENVER
TOPEKA
DETROIT
INDIANAPOLI S
S ANTA FE
S PRINGFIELD
OKLAHOMA CITY
PHOENIX
COLUMBU S
NA S HVILLE
ATLANTA
BATON ROUGE
AU S TIN
COLUMBIA
RALEIGH
WA S HINGTON
HARTFORD
BO S TON
ZONE A
ZONE B
RENO
When exch a nging a ir with o u t s ide:
ZONE A: G S HH 3 K u nit recommended *
ZONE B: G S EH 3 K u nit recommended
* In ZONE A, the G S EH 3 K u nit m a y b e us ed, bu t b elow 16F,
the d u r a tion of exch a nging a ir with o u t s ide will decre as e.
VN0004A
The Broan Fresh Air Systems units are versatile appliances capable of delivering filtered air (model GSFH1K) or both filtered and
fresh air to your home (models GSVH1K, GSHH3K and GSEH3K). Because each installation is different, it is recommended you take
the time to plan your installation. The three main areas to plan for are:
• Where to locate the Broan Fresh Air Systems unit
• How to pick-up the air from the room and distribute the filtered or fresh/filtered air
• Where to bring fresh air from outside and exhaust stale air to outside (models GSVH1K, GSHH3K and GSEH3K).
Use the following chart to determine the appropriate installation method for the unit.
Example: Basement installation
in Section 5.4.1
Example: Crawl space installation
in Section 5.5.1
CAUTION
Do not install duct or duct connector directly above the furnace. Do not connect the plenum connection closer than 2’ (0.61m)
to the furnace, as measured along the length of the duct.
The Return-to-Return
installation can be performed.
The Central Draw Point
installation can be performed.
Is the house equipped with a furnace or air handler?
4. PLANNING THE INSTALLATION
YES
NO
Use Stand Alone installation.
See Section 5.3.
NO
YES
Is there enough space to connect the unit duct(s) to the existing
furnace or air handler ductwork? (The unit duct connection can be
performed on the cold air return duct, at a minimum linear distance
of 2’ (0.61 m) from the furnace/air handler.)
OR