Briggs & Stratton Canadiana 1695868, Руководство оператора

Страница: 23 / 296

MAINTENANCE
SERVICE RECOMMENDATIONS
PROCEDURE
FIRST
5
HOURS
BEFORE
EACH
USE
AFTER
EACH
USE
EVERY
5
HOURS
EVERY
10
HOURS
EVERY
25
HOURS
BEGINNING
EACH
SEASON
BEFORE
STORAGE
SAFETY
Check to Make Sure
Auger Blade Stops Within
5 Seconds After Right
Control Lever is Released
✓
Lubricate Control Levers
and Linkages
✓ ✓ ✓
SNOW THROWER
Check Snow Thrower for
Loose Hardware
✓ ✓
Lubricate Hex Shaft and
Chains
✓ ✓
Lubricate Auger Shaft
Fittings
✓ ✓
Lubricate Chute Rotation
Gear and Deflector
Mechanism
✓
Remove All Snow and
Slush off Snow Thrower
to Prevent Freezing of
Auger or Controls
✓
Check Tire Pressure
✓
ENGINE
Oil, Check
✓ ✓ ✓
Oil, Change
✓ ✓
Check and Replace Spark
Plug
✓ ✓
NOTE: The warranty on this snow thrower does not cover items
that have been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
snow thrower as instructed in this manual.
The above
Service Recom mendations
are supplied to assist the
operator to properly maintain the snow thrower.
23
EMISSIONS CONTROL STATEMENT
Maintenance, replacement, or repair of the emissions control devices and
systems may be performed by any non-road engine repair establishment or
individual. However, to obtain “no charge” emissions control service, the
work must be performed by a factory authorized dealer.