Breville the Baker's Dozen LBM250, Инструкция

Страница: 9 / 28

9
Functions
BEFORE FIRST USE
Before first use, remove and safely discard any
packing material, promotional labels , transparent
protective film on the control panel and tape
from the bread maker. Check for any missing or
damaged parts. Clean all parts according to the
Care, Cleaning & Storage section in this book.
OPERATING YOUR BREVILLE BREAD
MAKER
1. Open the lid of the bread maker and remove
the bread pan using the handle.
2. If required, align the groove on the top of the
kneading blade to the one on top of the drive
shaft and slide the blade down onto the drive
shaft, in the bread pan.
3. Add ingredients to the bread pan in the order
listed in the recipe. First add liquids, fats, salt,
sugar and add the yeast in last.
IMPORTANT
Ensure all ingredients for making bread or dough
are added in the exact order listed. Failing to do
so may lead to a poor result and/or ingredients
being expelled out of the bread pan.
NOTE
Ensure yeast does not come into contact with
sugars, salt or liquid.
NOTE
If using the delay start timer, make sure the
yeast is on top of the dry ingredients to avoid
contact with water, salt and sugar, otherwise
the yeast activity will be affected.
4. Lock the bread pan into the base of the
bread maker by twisting slightly clockwise
until the bowl sits horizontal.
5. Fold the handle down and close the lid.
NOTE
The bread pan is locked in place correctly if
you cannot lift it from the bread maker without
twisting.
6. If fruits and/or nuts are required press and
hold the latch upwards under the handle
of the dispenser holder located on the rear
of the lid. Pull out the dispenser holder
and add ingredients before closing the
dispenser.
7. Plug the bread maker into a 220–240V
power outlet and switch the outlet on. The
bread maker is now in standby mode and
the display screen will illuminate for
1 minute.
NOTE
In standby mode, the LCD screen will show the
first MENU selection Basic Bread, displaying
MENU 1 900g MEDIUM TIMER 3:25. Press the
MENU button repeatedly to cycle through the
MENU choices 1–13.