17
Care, Cleaning
& Storage
CLEANING THE HOUSING
•
Wipe the exterior of the housing and the
display screen with a soft, damp cloth.
Do not use an abrasive cleanser or metal
scouring pad to clean any part of the bread
maker as these will scratch the surface.
WARNING
Never immerse the housing in water or place
any part of the bread maker in the dishwasher.
Take care not to allow water or cleaning fluids
to seep under the buttons or the display screen
on the control panel when wiping clean.
1. Ensure the bread maker is turned OFF
by pressing and holding the START /
CANCEL button for 3 seconds. Remove the
power plug from the power outlet. Allow
the bread maker and all accessories to
cool completely before disassembling and
cleaning.
2. If over-spills such as flour, nuts, raisins
etc. occur in the interior baking chamber,
allow the bread maker to completely cool
before carefully removing them using a
soft, damp cloth. Use extreme caution when
cleaning the heating elements inside the
baking chamber. Ensure the bread maker
is completely cool then gently wipe with
a soft, damp cloth. Do not use any type of
cleanser or cleaning agent.
CLEANING THE LID
1. Open the lid & use a soft, damp sponge or
cloth to clean the lid and dry thoroughly.
CLEANING THE FRUIT
& NUT DISPENSER
1. The fruit and nut dispenser can be removed
from the rear of the lid for cleaning.
2. Press and hold the latch upwards under
the handle of the dispenser holder located
on the rear of the lid. Pull out the dispenser
holder and remove the base of the Fruit and
Nut dispenser to clean.
3. Wash in warm soapy water and dry
thoroughly before reassembling and
returning to the bread maker.
NOTE
Never wash the fruit and nut dispenser in the
dishwasher.
CLEANING THE BREAD PAN
& KNEADING BLADE
The inside of the bread pan is coated with a
high quality non-stick coating. As with any
non-stick coated surface, do not use abrasive
cleansers, metal scouring pads or metal
utensils to clean these items as they may
damage the finish. Never wash the bread pan in
the dishwasher.
1. Remove the power plug from the power
outlet. Allow the bread maker and all
accessories to cool completely before
disassembling and cleaning.
2. Remove the bread pan from the bread
maker. If the kneading blade is still
connected, remove from the pan.
3. Half fill the bread pan with warm soapy
water and allow to stand for 10-20 minutes
to loosen any food residue.
Содержание the Baker's Dozen LBM250
Страница 1: ...the Baker s DozenTM Instruction Book LBM250...
Страница 27: ...27 Notes...