Breconcherry Planetary Gear PEEK, Руководство по эксплуатации

Страница: 20 / 26

6 Additional information on cleaner selection
6.1 Possibilities of ATEX classification
6.1.1 Cleaner with its own potential ignition source
Ignition protection measures are required so that the cleaner is grouped into a
category depending on the likelihood of a potential ignition hazard and other
limiting factors.
This restricts the application to certain zones (Directive 1999/92/EC) and places
additional restrictions on operation.
Hint!
The declaration of conformity according to 2014/34/EU must be
available in any case and belongs in the explosion protection
document.
The Orbital Cleaner of the company Breconcherry are EC type approved
and can be safely used under the following classification.
Planetary gear stainless steel Planetary gear PEEK
Typhoon, Tempest, Tornado, Tornado 4 Typhoon, Tempest, Tornado, Tornado 4
Fig.13 Fig.14
II 1G Ex h IIC T3..T6 Ga
Fig.15 Fig.16
II 1G Ex h IIB T3..T6 Ga
0°C ≤Ta≤140°C 0°C ≤Ta≤140°C
Fig.17 Fig.18
II 1D Ex h IIIC T140 °C Da
Fig.19 Fig.20
II 1D Ex h IIIC T140 °C Da
0°C ≤Ta≤140°C 0°C ≤Ta≤140°C
Cyclone, Twister Cyclone, Twister
Fig.21 Fig.22
II 1G Ex h IIC T3..T6 Ga
Fig.23 Fig.24
II 1G Ex h IIC T3..T6 Ga
0°C ≤Ta≤140°C 0°C ≤Ta≤140°C
Fig.25 Fig.26
II 1D Ex h IIIC T140 °C Da
Fig.27 Fig.28
II 1D Ex h IIIC T140 °C Da
0°C ≤Ta≤140°C 0°C ≤Ta≤140°C
Hint!
The maximum surface temperature depends mainly on the operating
conditions. The allowable temperatures can be found in the chapter
Operating Conditions.
Additional information on cleaner selection
Possibilities of ATEX classification
430BAL011767EN_3
20 28.05.2018