Breconcherry Planetary Gear PEEK, Руководство по эксплуатации

Страница: 5 / 26

1 General Information
1.1 Information about this document
The present Operating Instructions are part of the user information for the
component.
1.1.1 Binding Character of These Operating Instructions
These Operating Instructions contain the manufacturer's instructions to the
operator of the product and to all persons who work on or use the product
regarding the procedures to follow.
Carefully read these Operating Instructions before starting any work on or using
the product. Your personal safety and the safety of the product can only be
ensured if you act as described in the Operating Instructions.
Store the Operating Instructions in such a way that they are accessible to the
operator and the operating staff during the entire life cycle of the product. When
the location is changed or the product is sold make sure you also provide the
Operating Instructions.
1.1.2 Validity of the Instruction manual
The instruction manual is valid exclusively for the cleaner marked with an ATEX
marking.
The approved cleaners are suitable for operation in potentially explosive
atmospheres, taking into account the relevant regulations and the manufacturer's
declaration or declaration of conformity.
Use in potentially explosive atmospheres must be specified when ordering, as the
ATEX cleaners are slightly modified and labelled.
Their conformity, and therefore, their suitability for the intended purpose with
regard to the safety of the product in which they are installed must be assessed
in the conformity assessment of the entire product.
The ATEX version of the cleaner may only be safely used in hazardous areas for
the intended area. This manual contains basic instructions for the use of the
cleaner in potentially explosive atmospheres. This document is a supplement to
the general standard operating instructions for the cleaner and is therefore to be
considered part of it. These additional operating instructions must be observed
before installation and commissioning. The operating instructions must always be
available at the cleaner/system site.
1.2 Manufacturer address
1.3 Contact
Phone:+44 (0)1531 632476
Fax: +44 (0)1531 633839
General Information
Information about this document
430BAL011767EN_3
28.05.2018
5
Breconcherry Ltd
Westfalia House, Old Wolverton Road
Milton Keynes, MK12 5PY, United Kingdom