background image

7

• Exercise sufficient care in using the product by giving patient safety first priority.
• The product is to be used for dental treatment only by qualified personnel.
• Use commercially available batteries as specified by BRASSELER USA. Read the 

instruction manual included by the battery manufacturer thoroughly before use.

• Do not use a bent, damaged, deformed or non-ISO-conforming file. Using such a file may 

result in personal injury due to its sudden breakage or coming loose during rotation.

• Do not use or leave the product in a high-temperature environment such as under strong 

direct sunlight, in a car under a blazing sun, by a fire or near a stove.

• Check the product before use, pay attention to looseness, vibration, noise and 

temperature (heat generation). If any abnormal condition is found even slightly at that time, 
immediately stop use and contact Brasseler USA.

• Always clean the shank of the file to be installed. Allowing dirt to enter the chuck could 

cause loss of concentricity and deterioration of chucking force.

• Before changing the head or file, turn off the power of the motor handpiece. Changing 

with the power on may cause unintended rotation by accidental activation of the ON/OFF 
switch.

• When inserting the motor handpiece into the battery charger, position the handpiece 

correctly. Pushing it into the charger forcibly in the incorrect orientation may cause 
damage.

• Do not lubricate the motor handpiece. Only lubricate the head attachment.
• Do not heat sterilize the motor handpiece. Do not autoclave the motor handpiece.
• If you are using corrosive or harsh solutions please clean the motor handpiece etc., 

immediately after use. Failure to quickly clean the motor handpiece etc., can result in 
damage to the equipment or color changes of the outer casing.

• Do not reverse positive (+) and negative (-) when fitting the batteries.
• Do not throw the batteries into fire as the batteries will rupture, resulting in an accident.
• This equipment is for indoor use only.
• Observe the allowable rotation speed recommended by the file manufacturer.

• The motor handpiece has an electronic circuit (TORQUE LIMITER Function) to prevent files 

from breaking; however, files may still break due to metal fatigue if the torque is conditioned 
to be higher.

CAUTION

Содержание EndoSequence II






























Отзывы: