Brandt BT1208, Руководство пользователя

Страница: 59 / 68

59
EN
4 / PROGRAMMING YOUR APPLIANCE
•Remaining Time Display
— During programming, the display tells
you the estimated duration of the program for
a standard load (*).
(*) The time indicated by the machine at the
start of the program may vary during the cycle :
— After estimating the load contained in the
drum.
— If you change the washing temperature
(even during the spin), if you add or remove
options, the time will be recalculated and
updated on the display.
3
— During the cycle, the display shows
you the estimated time remaining until the end
of the cycle at all times.
— If power is disconnected during the wash
phase, when power returns the time displayed
may be less than the actual remaining time.
This time will be adjusted at the start of the
rinse phase.
3
• OTHER FUNCTIONS (continued)
• AUTOMATIC SAFETY FEATURES
•Anti-foam safety
Your washing machine can detect excessive
production of foam during the spin.
In this case, the spin stops and the machine is
emptied.
The cycle then resumes, adjusting the spin
speeds and possibly adding an extra rinse.
•Water safety
During operation, the water level is constantly
checked to prevent any overflow.
•Spin safety
Your washing machine has a safety feature
that can limit spinning if it detects that the load
is poorly distributed.
In this case, your laundry may be insufficiently
spun. Spread out your laundry evenly in the
drum and program a new spin.
•Lid opening safety
— As soon as the wash cycle has begun, your
machine lid locks.
— As soon as the cycle ends or when the
machine is at full tank stop, the lid unlocks.
— If you have programmed a "Delayed start",
the lid is not locked during the wait period pre-
ceding the start of the cycle.
— If you want to open the lid during the cycle,
press briefly on the “Start/
Pause” button
and wait at least 1 to 2 minutes so that the lid
safety feature unlocks.
Important:
Depending on the moment during the
cycle when you wish to open the lid, this
period may be longer since a cooling period
is required.
Indeed, during the cycle, to prevent the lid
from unlocking, the temperature inside the
machine must not exceed a certain thres-
hold, to prevent serious burns.
F