65
EN
7 / INCIDENTS THAT MAY OCCUR
Tip:
Certain incidents may arise when using your washing machine; here are the points to be
checked.
Problems:
Possible causes / Remedies:
The cycle does not start:
- you have not pressed the “Start” button.
- the appliance is not connected to the power source:
- check that the plug is plugged in.
- check the circuit-breaker and the fuses.
- the water intake valve is closed
(d01).
- the machine lid is not properly closed
(d07).
- the pause function is activated.
The sensitive buttons are inactive:
- the "Child Safety" feature is activated: deactivate it by
pressing the appropriate buttons.
The display is off:
- check that the plug is plugged in.
- check whether the circuit-breaker is activated.
- your machine is in "Energy savings" mode (display
goes off after 1hr without action).
Strong vibrations during spinning:
- your machine is not properly unpacked: check that all
the struts used for transport have been removed.
- the floor is not horizontal.
- your machine is not steady on all 4 feet: adjust the
feet.
The load is not spun or insuffi-
ciently spun:
- you have selected a program without spin, for exam-
ple "Draining".
- the spin safety feature has detected poor distribution
of the load in the drum: unpile the laundry and pro-
gram another spin phase.
Содержание BT1208
