Brandt BT1208, Руководство пользователя

Страница: 67 / 68

67
EN
7 / INCIDENTS THAT MAY OCCUR
• INCIDENTS THAT YOU CAN FIX YOURSELF
Your appliance detects certain operating incidents itself and informs you via specific messages on
the display. Below we explain how you can very easily fix these incidents yourself:
Messages Causes / Remedies
Filling fault . Check that the water intake valve is open, then press the “Start” button
to restart the cycle.
Emptying fault. Clean the pump filter (refer to the chapter on "EVERYDAY MAINTE-
NANCE: Cleaning the filter"), then press the "Start" button again to restart the cycle.
Cover locking fault. Check the lid is closed then press the “Start” button again to
restart the cycle.
Important:
If you have not been able to fix one of the above incidents yourself, call the repair engineer and
relay the message displayed (d01, d02, etc.) to make the repair easier.
Tip:
If you have experienced an operating problem which does not match the cases mentioned
above, please proceed as follows before calling a repair engineer:
— Turn the program selector to "0" position and turn off the power supply for at least 10 seconds.
— Put the plug back in and start another wash cycle.
If the problem continues, call your repair engineer.
Important:
Do not start another wash cycle if the drum remains blocked, if you see water around your
machine or if you can smell burning.