Brandt BT1208, Руководство пользователя

Страница: 43 / 68

43
EN
2 / INSTALLATION DE VOTRE APPAREIL
• REMOVING THE TRANSPORT BRACES (continued)
D
E
E
F
G
Fig. 08
Fig. 09
H
• Rear transport brace:
— Remove the 2 screws and the 4 screws
D
the 4 screws back in their original posi-
tion in the body.
Tip:
We recommend that you keep all parts
for bracing as you will have to replace them
if you need to move your machine at a later
date.
All these parts, as well as those used for the
entire machine are made from recyclable
materials. Please consider this when dispo-
sing of them at the end of your machine's
service life.
Information:
Before leaving the plant your
appliance was thoroughly tested; therefore
you may notice a small amount of water in
the tank or in the detergent dispensers.
Information:
If you wish to place your appliance in
line with your furniture units, you can break
the hose attachment hooks.
Important:
Be careful not to crush the hoses.
E
using a 10 mm tube wrench or a flat head
screwdriver (Fig. 08).
— Remove the brace
.
— Release the power cord from the plastic
part attaching the transport brace.
— Plug the holes left by the brace using the
remaining 2 covers
(Fig. 09)
and screw
H
G
F
E