Brandt BT1208, Руководство пользователя

Страница: 44 / 68

44
EN
2 / INSTALLING YOUR APPLIANCE
Fig. 10
Fig. 11
Fig. 12
AA
AA
BB
BB
• SETTING UP YOUR APPLIANCE
•
Placement on rollers:
Your machine has retractable rollers so that
you can move it easily.
To place it on rollers, turn the lever at the base
of the appliance from the right to the extreme
left
(Fig. 10).
Important:
During operation, the machine must not
rest on its rollers: do not forget to return the
lever to its initial position.
•
Levelling:
Your machine is equipped with two adjustable
feet in front to compensate for unevenness in
the floor. To adjust horizontality and stability
of the appliance, proceed as follows:
— Remove the baseboard
(see Fig. 04, pre-
vious pages).
— Place the machine on rollers.
— Unscrew the 2 screws used to block the feet
using a TORX T20 screwdriver
(Fig. 11).
— Adjust the two feet using a flat head wrench
or pliers to level the appliance.
— Put the appliance back on its feet and return
the lever to its original position.
— Check the stability of the machine by pres-
sing on the lid in a diagonal direction (direc-
tion AA then direction BB)
(Fig.12) . There
must be no visible movement of the
appliance.
— When the adjustment is correct, screw the 2
screws for blocking the feet and reattach the
baseboard.
• Environment:
Important:
If you place your machine next to ano-
ther appliance or piece of furniture, we
recommend that you always leave a space
between them to allow air to circulate.
Tip:
We strongly advise against installing
your appliance:
— in a damp, poorly-ventilated room.
— in a place where it could be subject to water
splattering.
— on a carpeted floor. If you cannot avoid it,
take all precautions so as not interfere with air
circulation at the bottom, to ensure good ven-
tilation of the internal components.